Prefabricated Transformer Substation

1. Safety inspection: Before the box-type transformer power supply operation, it is necessary to carry out safety inspection on the external environment and equipment of the box-type transformer to ensure that the appliance works normally and meets the requirements of use.

2. Turn on the incoming cable switch: Turn on the incoming cable switch first, and ensure that the grounding switch is in the closing position.

3. Wait for inspection: After the incoming voltage and current are stable, check whether the insulation status, temperature, pressure and other parameters of the box-type transformer are normal. If there is an abnormal situation, power off should be handled.

4. Power transmission: under normal circumstances, the circuit breaker on the outlet side can be closed at this time, and the box-type transformer will start to run and send the power to the power end.

5. Monitoring box-type transformer: After starting power supply operation, it is necessary to regularly monitor the operating status of the box-type transformer, including whether the temperature, pressure and other parameters are within the normal range, and the problem needs to be stopped immediately for inspection.

6. Stop power supply: When no power is needed, you need to perform operations in reverse order, first turn off the switch at the outlet end, and then stop the switch that falls into the wire.

7. Completed work record: box-type transformer power transmission operation completed

After that, it is necessary to record, including the switching state, voltage and current value, power usage, etc., for future analysis and inspection.

1. Prevent electric shock: The box-type transformer is equipped with high voltage equipment. Contact with metal parts such as the box may lead to electric shock accidents. Keep a safe distance and comply with the relevant provisions in the operation manual.

2. Operation specifications: Perform operations according to the relevant specifications in the box transformer power supply operation manual to ensure that the equipment complies with the requirements in the operation process and to prevent equipment damage and personal injury.

3. Load balance: The output voltage of the box-type transformer should be stable to avoid abnormal operation of the equipment due to too large or too small load, resulting in failures and accidents.

4. Safety switch and control device: Ensure that the safety switch is turned on, the control device is in normal working state, and the parameters meet the requirements.

5. Cleaning and maintenance: In addition to regular operation testing, it is necessary to keep the box-type transformer clean, regularly check whether the operation of each component is normal, and adjust the working state of the box-type transformer.

6. Emergency disaster: For the emergency disaster of the power system, it is necessary to control the box-type transformer in time according to the operation process to prevent the expansion of damage and protect the safety of personnel.

To sum up, in the process of installing the box-type transformer, relevant safety norms and operating procedures should be observed, regular testing and maintenance should be carried out to ensure the stable operation of the box-type transformer and ensure the safety of personnel. During the operation, pay close attention to the operating status of the equipment and handle all kinds of faults in time to prevent equipment damage and accidents.