0102030405
Insulation Fiber Glass Covered Winding Wire
The DetailsHeg
The Glass in Fiber Glass Covered Insulated Rectangular Flat Aluminum Wire may be applied in woven tape form or as a continuous fiber. It has proved to be an efficient insulation providing coil winders with higher thermal stability, adequate electrical properties and good resistance to abrasion after varnishing. The glass is bonded with a varnish for dielectric strength to improve mechanical properties.
Fiber Glass lapped conductors (bare or enameled) are very suitable for windings of electric motor stators, generators, special transformers and high voltage motors. In general this insulation can be applied where high mechanical strength and high insulation properties are required. It exhibits a very high degree of mechanical and thermal stability.
The bare electrical aluminum wire from extrusion process is the most ideal materials to produce Fiberglass Covered Insulated flat square aluminum wire.
Most common application is in traction motors. It exhibits a very high degree of mechanical and thermal stability, either for class F and H insulation when impregnated with polyester, Polyester imide or epoxy based impregnating varnishes. For higher thermal class, the Glass fiber-lapped conductors can be impregnated with silicone based resins of thermal class 200.
Application of Fiber Glass covered flat square aluminum wire Heg
The product is widely used in transformers, electromagnets, welders or other similar products, medium and large electrical appliances winding.
Suitable for oil-immersed transformers, dry-type transformer, high-temperature transformer, Generator, welding machine and kinds of motors, UPS, Regulator, Rectifier. etc.
The Material of Fiber Glass covered flat square aluminum wire Heg
Drawing or extruding bare wire confirm to National Standard. smooth surface, no defects
Application of Fiber Glass covered rectangular aluminum wire :
Layers: single and double.
Insulation thickness (rectangular):
(1)single:0.3/0.4/0.5
(2)double:0.2/0.3/0.4/0.5
(3)fiber and film covered:0.4/0.5/0.6.
Resistivity : Aluminum 20ºC<=0.028000Ω(mm)^2/m
Resistivity : copper 20ºC<=0.017241Ω(mm)^2/m ,
Aluminum 20ºC<=0.028000Ω(mm)^2/m